Description:
Check door measurements, installation requirements and whether a separate door handle is required.
Question:
Will this palm vein deadbolt fit my existing door?
Answer:
Model reference: LSH-DBPLV-899
Applies to: LSH-DBPLV-899
If your SKU differs, search our support page by your Model SKU to find the correct article.
The Laser Smart Deadbolt Lock with Palm Vein Recognition is designed for compatible Australian doors. Check your existing single-cylinder lock before starting installation.
Required measurements:
- Door thickness: 35mm to 55mm.
- Backset: 60mm or 70mm. This is the distance from the door edge to the centre of the lock hole.
- Cross-bore diameter: 38mm or 54mm. Use the supplied spacer appropriate to your hole size.
- Latch bore in the door edge: 25mm.
- If a separate door handle is fitted, check the 100mm minimum spacing dimension shown in the manual's door-compatibility diagram.
Use the supplied installation template to check the dimensions. The latch can be extended from 60mm to 70mm. The lock operates the deadbolt only and does not include a separate door handle. The manual recommends fitting a door handle for easier everyday use.
The exterior needs to be protected from direct rain, moisture and sunlight. The manual recommends professional installation if you are unsure. Do not use an electric drill to tighten mounting screws.
Refer to the illustrated user manual for the complete fitting sequence.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article