Smart Internal Door Lock FAQ - Door Fit and Compatibility

Description: Check door thickness, backset, cross-bore measurement and the required single-cylinder configuration before installing the lock.

Question:

Does the fingerprint door lock fit my internal door?

Answer:

Model reference: LSH-INDCB-905

Applies to: LSH-INDCB-905

If your SKU differs, search our support page by your Model SKU to find the correct article.

The Laser Smart Internal Door Lock with Fingerprint is intended for compatible Australian internal doors.

Check your existing door before purchase or installation:

1. Door thickness must be 35mm to 55mm.

2. Backset must be 60mm or 70mm. Backset means the distance from the edge of the door to the centre of the main lock hole.

3. The cross-bore (main hole) must be 54mm in diameter.

4. The existing lock must have a compatible single-cylinder configuration.

The supplied latch can be fitted at either the 60mm or 70mm backset position.

For indoor use only: Install in a dry, sheltered area away from rain, moisture and direct sunlight. If your door does not meet these measurements, do not assume the lock will fit. Consider professional installation if unsure.