CD Micro Hi-Fi FAQ - Clock and Alarm Setup

Question: How do I set the clock and alarm?

Answer:

Model reference: CD-MCHFFM-428

Applies to: CD-MCHFFM-428

If your SKU differs, search our support page by your Model SKU to find the correct article.

The Laser CD Micro Hi-Fi System with Bluetooth has a clock and an alarm with FM radio, CD or USB as the wake-up source.

Set the clock:

1. In standby, hold TIMER on the remote for a few seconds.

2. Use Previous or Next to select 12-hour or 24-hour format, then press TIMER.

3. Set the hour with Previous or Next and confirm with TIMER.

4. Set the minutes and press TIMER to save.

Set the alarm:

1. While the clock is displayed, hold ALARM on the remote for a few seconds.

2. Set the hour using Previous or Next and confirm with ALARM.

3. Set the minutes and confirm with ALARM.

4. Select FM radio, CD or USB and confirm with ALARM.

5. Set the wake-up volume and press ALARM to save.

Briefly press ALARM in standby to turn the alarm on or off. The alarm icon appears when enabled. Press Power/Standby to stop alarm playback.

Clock and alarm settings are retained only while mains power is connected. If power is disconnected, you may need to set them again.