Question: What safety precautions should I follow when installing the Laser Starlink Pivot Mount?
Answer:
Model reference: PC-SLG3PI-813
Applies to: PC-SLG3PI-813
Before installing the Laser ChargeCore Starlink Gen 3 V4 Adjustable Pivot Mount, read the installation instructions carefully.
Important safety guidance from the manual:
- If you are not comfortable with any part of the installation, do not continue.
- Contact a professional installer if needed.
- The mount must be fixed firmly to a strong, flat, and level surface when used on a moving vehicle or vessel.
- Do not install the mount if the surface is unstable or cannot be secured as described.
- Mounts are not designed for high winds, hurricanes, or tornado conditions.
- Always use tethering to help prevent failure during unexpected strong winds.
- Wear suitable eye, hand, and face protection when drilling.
- Avoid electrical wiring and water pipes when drilling.
- Drill at a slight downward angle from inside to outside and apply sealant properly.
Poor installation can cause equipment to fall, allow water or insects to enter, or create safety risks.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article