PJ-OBFH14-525 / PJ-OBFH12-535 - Outdoor Cinema Bundle Setup, Soundbar Pairing, Connections and Specifications

This guide applies to:

• PJ-OBFH14-525
• PJ-OBFH12-535

Main devices used in these bundles:

• PJ-OBFH projector
• PJ-OBFH Bluetooth soundbar 

What’s in the box

Each bundle includes:

Self-inflatable screen

• Inflatable screen with built-in air pump
• Carry bag
• 4 x tie down ropes
• 8 x tether stakes

Projector

• Projector with lens cover
• Remote control
• AC power adaptor

Soundbar

• Bluetooth soundbar
• USB-A to USB-C cable for power

Additional items you may need:

• 2 x AAA batteries for the projector remote
• Power extension cord with double adaptor
• HDMI cable
• 3RCA to 3.5mm AV cable for devices without HDMI output  

Before you start

For best results:

• Set up the bundle on a flat, stable surface
• Keep the air pump away from water
• Do not use the screen in bad weather such as storms, rain, strong wind, or snow
• Use the projector in dark conditions for a clearer image
• Make all ropes and stakes visible to reduce trip hazards
• Securely tie down the inflatable screen using all supplied ropes and stakes  

How to set up the inflatable screen

1. Unpack the screen frame and lay it on the ground with the front of the screen facing up.
2. Make sure the air pump is not blocked.
3. Connect the air pump to power and inflate the screen.
4. Find the 4 anchor points on the sides of the screen.
5. Thread the ropes through the anchor points.
6. Attach both ends of each rope to the stakes and tie them securely with double knots.
7. Adjust the ropes so the screen stands upright and does not lean or wobble.

If the air pump does not start, unzip the zipper and turn on the switch.  

How to set up the projector

1. Unpack the projector and connect it to power.
2. Remove the lens cover before use.
3. Place the projector in front of the screen.
4. Connect your external device, such as a DVD player, console, or streaming device.
5. Press the power button on the projector or remote to turn it on.
6. Press Source and select the correct input.
7. Use the focus and keystone controls to improve the image.

The projector works best when placed as close to the centre of the screen as possible to reduce image distortion. If the image looks uneven, use the built-in keystone adjustment.   

Projector connections

The projector supports:

• HDMI 1
• HDMI 2
• HDMI 3
• AV
• USB
• Micro SD
• 3.5mm headphone audio out
• Bluetooth audio out to a speaker or audio device 

How to connect an HDMI device

1. Turn off the projector before connecting the HDMI cable.
2. Connect your device to one of the HDMI ports.
3. Turn on the projector.
4. Press Source and select the matching HDMI input.

If there is no sound from a DVD player over HDMI, check the player’s digital audio settings and set them to Auto or PCM. 

How to use AV, USB, or Micro SD

AV

• Connect the AV cable to the projector
• Turn on the projector
• Switch to AV mode

USB or Micro SD

• Turn off the projector before inserting the device
• Connect the USB flash drive or Micro SD card
• Turn the projector on
• Open the media player and select the correct source
• Choose the file you want to play

Supported storage sizes:

• USB flash drive up to 1TB
• Micro SD card up to 32GB

Supported listed formats:

• MPEG-4
• MP3 

How to pair the soundbar to the projector

1. Connect the soundbar to power using the supplied USB-A to USB-C cable.
2. We recommend using a 5V, 1A USB adaptor, but you can also use the projector’s USB port.
3. Turn on the soundbar using the power switch on the back.
4. The soundbar should automatically enter Bluetooth pairing mode. If not, press the Mode button until Bluetooth mode is selected.
5. On the projector, open Setup.
6. Go to Bluetooth and turn Bluetooth on.
7. Press OK to search for nearby Bluetooth devices.
8. Select PJ-OBFH-C and press OK to connect.

Once connected, the projector audio will play through the soundbar.   

How to use the soundbar on its own

The soundbar supports:

• Bluetooth
• AUX
• USB
• Micro SD

Bluetooth name:

• PJ-OBFH-C

If prompted for a password during Bluetooth pairing, enter:

• 0000 

Soundbar quick notes

The soundbar:

• should be fully charged before first use
• uses a 5V, 1A USB power source
• supports USB drives and Micro SD cards up to 128GB
• supports MP3 playback from USB or Micro SD
• does not support Bluetooth hands-free calls 

Projector menu highlights

The projector menu includes:

• Picture settings such as contrast, brightness, colour temperature, and noise reduction
• Audio settings such as sound mode, treble, bass, balance, and auto volume
• Option settings such as language, aspect ratio, Bluetooth, projection mode, and reset
• Time settings such as sleep timer and auto sleep 

Common troubleshooting

No image or No Signal

Check:

• the projector power light is on
• the lens cover has been removed
• cables are connected properly
• the correct source/input is selected 

Image is wider at the top or bottom

This is keystone distortion.
Use the projector’s built-in keystone correction to straighten the image. 

Projector overheats and switches off

• Let it cool for a few minutes
• Check the vents are not blocked
• Check the air filter and clean if needed
• Turn it back on after cooling 

Soundbar has no power

• Check battery level
• Try turning it on while connected to power
• Try charging it with a USB wall adaptor instead of a laptop or computer
• Try another similar charging cable 

Soundbar will not connect by Bluetooth

• Place the soundbar close to the device
• Wait up to one minute for PJ-OBFH-C to appear
• Refresh the Bluetooth list and search again
• Make sure the soundbar is in Bluetooth mode
• Make sure it is not already connected to another nearby device 

Projector specifications

• Native resolution: 1920 x 1080
• Supported HDMI input: 1080p, 1080i, 720p, 576i, 480p, 480i
• Power consumption: 72W operating
• Standby: 0.8W
• Power adaptor input: AC 100-240V 50/60Hz
• Power adaptor output: DC 30V 2.4A
• USB support: up to 1TB
• Micro SD support: up to 32GB
• Bluetooth version: 5.0
• Dimensions: 230 x 182 x 88 mm 

Soundbar specifications

• Inputs: Bluetooth, AUX audio, USB, Micro SD
• USB and Micro SD size: up to 128GB
• Number of speakers: 2
• Speaker output: 5W each
• Frequency range: 100Hz-16KHz
• Sensitivity: 85.5dB
• Battery: 1200mAh
• Bluetooth version: 5.3
• Input voltage: 5VDC
• Dimensions: 385 x 65 x 50 mm
• Weight: 600g 

Need more help?

If you need more help, use the support details in the manual or refer to the original projector and soundbar guides for more product-specific troubleshooting. The manuals and quick start guides include setup visuals and bundle-specific support details.