Palm Vein Deadbolt FAQ - Set Administrator PIN

Description:

Set up the initial administrator code before registering access methods or connecting the app.

Question:

How do I set the administrator PIN before using the lock?

Answer:

Model reference: LSH-DBPLV-899

Applies to: LSH-DBPLV-899

If your SKU differs, search our support page by your Model SKU to find the correct article.

Before using the Laser Smart Deadbolt Lock with Palm Vein Recognition, set an administrator PIN on the lock itself.

Important first-use warning: Before initial configuration, the lock can be opened with any PIN, palm print or smart card. Complete the setup immediately after installation.

1. Open the battery cover on the interior assembly to find the SET button.

2. Press SET. If no administrator PIN is configured, the lock will prompt you to create one.

3. Enter a new PIN containing 6 to 8 digits.

4. Press the keypad Unlock button (open padlock symbol).

5. Re-enter the same PIN and press Unlock to confirm.

6. Keep your administrator PIN in a private, accessible place.

Once administrator and user credentials are configured, the lock will no longer accept unregistered PINs, palms or smart cards.

If you forget the administrator PIN, the manual states a factory reset is needed to regain settings access. Resetting erases all registered lock data.