Pool Fountain Speaker FAQ - Cleaning and Storage

Question: How do I clean the speaker and filter after use?

Answer:

Model reference: SP-FMPOOL-251

Applies to: SP-FMPOOL-251

If your SKU differs, search our support page by your Model SKU to find the correct article.

After each use of the Laser Bluetooth Pool Speaker with Fountain:

1. Lift it out steadily, tilt it to drain and rinse the whole unit with clean water.

2. Remove the filter sponge and rinse it under running tap water.

3. Shake out excess water and leave the speaker and sponge to air-dry. The manual gives four to five hours as a guide, but visually check that the speaker, sponge and charging port are completely dry before storage or charging.

4. Store it somewhere cool, dry and well ventilated, out of direct sunlight.

Do not use detergent, dishwashing liquid, alcohol, disinfectant or other household cleaning products. They can damage the seals and casing and contaminate pool water.

Replace a sponge that is torn, deformed or too clogged to clean. Do not force open the sealed pump or impeller.

For white mineral build-up, turn the speaker off and take it out of the water. Rinse the nozzle and gently wipe it with a soft cloth or cotton swab. Rinse again thoroughly and air-dry. Do not use strong acids, alkalis or household cleaners.

For longer storage, clean and drain the unit, dry it completely, turn it fully off and store it indoors away from damp, heat and direct sunlight.