RGB Lava Lamp Speaker FAQ - First-Time Setup

Description:

Set up the RGB Lava Lamp Speaker correctly and allow enough time for the wax to warm and begin flowing.

Question:

How do I set up the RGB Lava Lamp Speaker for first use?

Answer:

Model reference: SP-RGLAVA-282

Applies to: SP-RGLAVA-282

If your SKU differs, search our support page by your Model SKU to find the correct article.

To set up the Laser RGB Bluetooth Lava Lamp Speaker for first use:

1. Carefully unpack all parts.

2. Check the vase. The wax layer should be solid and flat before use. If the wax looks melted or soft, let the lamp sit at room temperature until it has solidified.

3. Place the base on a flat, stable, heat-resistant surface.

4. Fit the top cover onto the vase. Do not remove the cap seal. The air space at the top of the vase is required for wax expansion during operation.

5. Plug the lamp into a 240V AC wall outlet.

6. Press the power switch to turn the lamp on.

During first use, allow 3 to 5 hours for the lamp to warm up and operate correctly. For best performance, use it in an ambient temperature between 22C and 25C.