PJ-TUHDAB-877 Projector Setup Guide

Step-by-step instructions for setting up the PJ-TUHDAB-877 projector.

Question: How do I set up the PJ-TUHDAB-877 projector?
Answer:

1. Place the projector on a stable, level surface.
2. Plug in the AC power cable to the power port.
3. Insert 2x AAA batteries into the remote control.
4. Press the Power button on the remote or the projector to turn it on.
5. Adjust the focus using the Focus wheel to sharpen the image.
6. Allow auto-keystone correction to align the projection. If necessary, use manual keystone settings.

Tips for the best viewing experience:

• Project onto a flat, light-colored wall in a dimly lit room.
• Position the projector at eye level for minimal distortion.