Laser Lava Lamp Bluetooth Speaker FAQ – First Time Setup Guide

Question: How do I set up my Laser Lava Lamp Bluetooth Speaker for first use?

Answer:
Model reference: SP-LAVABK-762

To set up your lamp correctly:

1. Unpack all parts carefully, including the lamp base, G9 bulb, vase, top cover, and AUX cable.

   Manual_SP-LAVABK-762_v1.1_web

2. Ensure the wax inside the vase is completely solid and flat before use. If it looks soft or melted, let it rest at room temperature until solid.

3. Place the base on a flat, heat resistant surface.

4. Insert the G9 35W bulb into the socket inside the base. Do not use alternative bulbs.

5. Position the vase on the base without breaking the seal.

6. Place the top cover on the vase.

7. Plug the power cord into a 240V wall outlet.

8. Use the power switch on the base to turn the lamp on or off.

The lamp may take 3 to 5 hours to warm up on first use, especially if your room is cooler. Optimal performance is at 22 to 25 degrees Celsius.

This setup applies to the Full Product Name: Laser Lava Lamp with Bluetooth Speaker – Black.