Laser Blu-Ray Player BLU-BD4000: Countdown Timer Issue - Firmware Update Guide

Question: How do I install the firmware update for the Laser Multi-Region Blu-Ray Player (BLU-BD4000) to fix the countdown timer issue?

Answer:
To fix the countdown timer issue on your Laser BLU-BD4000 Blu-Ray Player, please follow these steps to install the firmware update using a USB flash drive:

✅ What You Need:

• A USB flash drive (formatted to FAT-32)

• The two update files:

  • 8553_linux_demo_dbg.bin

  • mt8553_bl_linux.bin

Step-by-Step Instructions:

1. Prepare Your USB Drive:

   • Insert a FAT-32 formatted USB drive into your computer.

   • In the root directory, create a folder named UPG_ALL.

   • Place both firmware files into the UPG_ALL folder.
     ⚠️ Do not rename the files.

2. Update the Player:

   • Plug the USB drive into the Blu-Ray player.

   • On your remote, press SETUP.

   • Navigate using the arrow keys:
     General Setting → System → Upgrade → USB Storage.

   • Press OK to begin scanning the USB drive.

3. Confirm and Install:

   • When prompted to upgrade, select Yes.

   • Follow all on-screen prompts until the update completes.

4. Final Steps:

   • After the upgrade finishes, the player will enter standby mode.

   • Turn off the player, wait a few moments, then power it back on.

5. Verify the Update:

   • Press the DISPLAY button on your remote.

   • Use the Up and Down arrow keys to toggle through on-screen time display options.

This update resolves the known countdown timer issue and ensures smoother operation of your device.

http://www.laserco.com.au/content/download/BLU-BD4000/FW-BLU-BD4000-206-2358.zip