NAVC-10CP-235: Audio Output Options

Question: How can I play audio from the NAVC-10CP-235 Wireless Screen through my car stereo?
Answer:

• Built-in Speaker:Adjust volume via the screen interface.
  • 
• 3.5mm Aux Cable:
  1. Connect the aux cable from the screen to your car stereo's aux input.
  2. Switch the stereo to Aux Mode.
• FM Transmitter:
  1. Tune your car radio to an unused frequency (e.g., 106.2 MHz).
  2. Set the same frequency on the CarPlay screen under Audio Out > FM. 
  3. Slide the red marker left/right or tap < and > buttons to select the unused FM frequency, e.g., 106.2MHz. Now, audio from your phone will play on your car stereo.
     1. 
        
  4. Adjust volume on the transmitter, stereo, and phone.